"Water – in the right place – is our most important commodity but water leaks, in the wrong place at the wrong time can damage a business in a big way. What seems like an insignificant problem can cost millions when it comes to lost computer data, downed telecommunications switches, damaged files, ruined works of art, or water-soaked rare books. Personnel safety can be threatened by roof leaks in buildings, or by fire from water-caused electrical short circuits."

Water leak detection has become high up on the list of priorities for many companies anD INDUSTRIES.

The water leak detector cable. The cable itself is the sensor. Every centimet re of rugged, fire rated cable is sensitive to water and when water comes into contact with the cable, even a few millilitres, the system is able to detect the leak AND report the location. The detection cable can be installed in any length from a few metres in a drip tray to hundreds of metres around the perimeter of an office area. Typical applications in office buildings include the monitoring of fan-coil units around the edge of the building office floors, detectors surrounding the central utility core on each floor of the building and dedicated monitoring of leaks in electrical switch gear rooms, server rooms, network communications, etc.

Each section of sensor cable is monitored by an inexpensive Sensor Interface Module. Various models are available with and without relay contacts and digital displays, but all modules are easily networked back to a central alarm panel or interfaced directly to the LAN as easy to design and install as a simple water leak detection system for one or two rooms. for remote alarm and monitoring via cell phones and web browsers or as a major installtion in industrial complexes and high rise buildings.

The developed water sensing cable has passed the most rigorous of examinations and has been at the cutting edge of distributed sensing detection for decades, protecting tens of thousands of locations around the globe with their water leak detection technology.

Our technology to ensure that even the smallest leaks are detected and located before a catastrophe ensues.

A public address or "PA" system is an electronic amplification system with a mixer, amplifier and loudspeakers, used to reinforce a given sound, e.g., a person making a speech, prerecorded music, or message, and distributing the sound throughout a venue. PA systems are often used in venues such as school churches, ,in institutional and commercial buildings, to read announcements or declare states of emergency. Intercom systems, which are often used in schools, also have microphones in each room so that the occupants can reply to the central office.

Ceiling Mounted Speakers
This speaker ceiling mount for in-ceiling or in-wall speakers can be easily installed to add a customized look.

The mount works in standard drywall, but includes beveled screw holes also for other applications. The ABS construction allows overpainting to match any imaginable decor.

Amplifier MIC
This amplifiers have four microphone input, and separate emergency and music input. Additional functionality like priority assignment, VOX switching, speech filter and two-tone chimes are also provided. You can add Plena booster amplifiers to increase the loudspeaker driving capability.

The dual-zone model directs sound (announcements or background music) to two separate areas - very useful if announcements or background music need not to be heard everywhere. Two front panel switches direct the output to the separate zone.

Gooseneck MIC
The gooseneck microphone is a stylish high quality unidirectional condenser microphone, mainly intended for public address applications.

Features
-> Unidirectional condenser microphone
-> Flexible stem
-> Phantom powered by amplifier
-> On/off sliding switch with priority contact

Stand MIC
With this unidirectional microphone, we provides impressive audio performance at an economical price. The LBC 2900/xx is based on a dynamic transducer element that is designed for high speech intelligibility. Its rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications.

Features
-> Unidirectional dynamic microphone
-> Handheld or stand-mounted use with clip (supplied)
-> Rugged construction
-> Modern non-reflective dark grey finish

Wall Mounted Speakers
Wall-mounted speakers have become a part of many offices and homes due to the flexibility in space it provides. The advantage of wall-mounted speakers over the conventional speakers is its compact size and that there is no floor space lost. Wall mounted speakers have fewer distortions as the cone moves less. Wall-mounted speakers do not need filters, as there are fewer components in the signal path. These speakers produce better stereo sound than the conventional speakers.

Features
-> 10000 Sq Feet of Area Coverage per system.
-> Can drive upto 20 Torrant Transducers.

CRMS (Centralized Reporting and Monitoring System) Software Supporting:
-> Online servicing/maintenance via web meetings.
-> Scheduled or Real Time health status report generation for Systems Audit.
-> Parameter configuration of the controller.
-> Two-way Communication between the controller and the computer.
-> RS/ EIA 485 to RS/EIA 232C converter to transfer the controller data to the serial port of your computer.


CRMS (Centralized Reporting and Monitoring System) Software:

Salient Features
-> Easy to Install.
-> Centralized Reporting and Monitoring System.
-> Facility to configure USFG controller parameters for all controllers in one go (broadcast) or for an individual controller.
-> Facility to schedule / generate a consolidated Health Status Report of all the controllers and / or an individual controller. This is possible either with the help of the inbuilt scheduler or in real time.
-> Individual folders for individual Torrant Controller reports with the folder name same as the machine id. One single folder for the consolidated report.
-> PCB snapshot of the controller for faulty transducer drivers.
-> Configurable control of the image quality of the PCB snapshot, thereby enabling the customer to manage the computer memory effectively.
-> Admin Level password for report generation and scheduling.
-> Service Level password for parameter configuration of all / individual controllers.
-> Test facility to check if the signal is being transmitted to the transducer from the drivers on the PCB.
-> Ping facility to check if all the controllers installed at the customer site are in the daisy chain network. If not then the corresponding controller will have an 'Offline' status else it will have an 'Online' status.
-> Configurable ping acknowledgement / return time. This would be the time for which CRMS software would wait for the controller to respond before it confirms the status of the controller as 'Online' or 'Offline'.
-> Test Facility to test all controllers in a sequential mode or in an individual mode.